Accelerates curing even under unfavorable bonding conditions.
Brief description with advantages:
Special styrofoam-friendly activator spray for cyanoacrylate adhesives (instant adhesives).
- Colorless
- For instant curing of cyanoacrylate
- bonding (flash fixing)
- Improves processing conditions even with high layer thicknesses and inactive materials
- Suitable for styrofoam
Application:
The product is used to activate contact cyanoacrylate adhesives, especially for workpieces made of Styrofoam.
The curing of the adhesive is significantly accelerated, especially with large layer thicknesses, inactive
materials and unfavorable processing conditions (e.g. very dry air or cold). In addition, the activator spray
the annoying reaction odor of cyanoacrylate adhesives as well as their efflorescence (white
Precipitate) at the adhesive joint.
Handling:
Recommended processing temperature 10 - 30°C. Shake aerosol can briefly before use. Spray the parts to be joined
spray the parts to be joined with activator spray and apply adhesive or place the adhesive in the bonding gap, briefly
align components briefly and then apply the activator spray. The formulation of the activator spray is irritating to skin and
eyes. Therefore, be sure to wear protective goggles and gloves during application.
| Transmitter: | No |
| Charger: | No |
| License: | No |
| Brand: | JAMARA |
| Shipping weight: | 0,18 kg |
| Item weight: | 0,18 kg |
| Dimensions ( Length × Width × Height ): | 17,30 × 5,30 × 5,30 cm |
| Age recommendation: | n/a |
| Safety instructions: | |
| Target group: | n/a |
